Click image to view full size image
Description:
Wrinkle removal IPL hari removal instrument*Super Hair Remove
*IPL Function
*Factory price&High quality&Good service
Newest IPL SHRSystem/SHR Skin Rejuvenation hari removal beautyapparatus
Application:
1. Therapyacne;
2. Reductionof vascular lesions ;
3. Reductionof pigmented lesions
4.Skin rejuvenation;
5. Permanenthair removal;
6. Wrinkleremoval
1.ProductStructure and Accessories
2.Specification:
Wavelength | 430/530/560/580/640-1200(nm) |
Handpiecenumber | 2 piece with 5filters |
Spotsize | 12*30mm&15*50mm |
Coolingsystem | semiconductorair water cooling gel |
IPL lightenergy | 1-50(J/cm²) |
PulseDuration | 1-10ms |
PulseNO. | 1-6 |
Skincooling | -4°c-10°c |
Display | 10.4"colortouch screen |
Outputpower | 2500W |
SHRwidth | 1-7ms |
SHRfrequency | 1-10HZ |
Voltage | 110V, 50HZ or220V, 60HZ |
MachineSize | (L*W*H):42cm*38cm*90cm |
Netweight | 58kg |
Grossweight | 91kg |
Packagesize | 65cm*63cm*111cm |
3. Hand-piece andApplication
Wavelength | Treatment |
430-1200nm | Acneremoval |
480-1200nm | Age spots, sunspots & pigmentation removal, skin rejuvenation |
530-1200nm | Frecklesremoval, Skin rejuvenation |
560-1200nm | Whiteningskin, Skin rejuvenation |
580-1200nm | Vascularremoval, fade melasma, skin rejuvenation |
640-1200nm | Thick Hairremoval |
690-1200nm | Soft Hairremoval |
4. Hairremoval
1. Cut orshave hair to 1-2mm or ask patients to shave at home 2-3 daysbefore treatment.
2. Cleartreatment area.
3. Turn onmachine,
1). Use SHR,adjust pulse width at 7ms, frequency 5HZ, energy10J/cm2.
2). Use normalhair removal treatment, put the 640nm or 690nm filter into theslot, select "hair removal", adjust the parameter, set it to‘ready’ .
4. Put coolinggel on treatment area about 2mm.
5. Wearprotect goggles for patient and operator.
6. Shot thetreatment area, let the crystal tip to touch cooling gel, You arepermitted to have 1/3 overlapping on treatmentarea.
7. Wipe offcooling gel after treatment and clear treatment area with coolingwater. If patients feel warm or hot, you may put ice bag ontreatment area until heat disappear.
5. Skinrejuvenation
1. Cleartreatment area.
2. Turn onmachine , put the 560nm filter into the slot, select "skinrejuvenation", adjust the
parameter, setit to ‘ready’ .
3. Put coolinggel on treatment area about 2mm, you are suggested to put coolinggel in refrigerator to keep temperature of gel during0-4°C.
4. Weargoggles for patient and operator
5. Shot thetreatment area, let the crystal tip to touch cooling gel. You arepermitted to have 1/3 overlapping on treatmentarea.
6. Wipe offcooling gel after treatment and clear treatment area with coolingwater. If patients feel warm or hot, you may put ice bag ontreatment area for 30 minutes untilheat-feeling disappears.
6.Pigmentation Therapy
1. Cleartreatment area.
2. Turn onmachine , put the 480nm or 530nm filter into the slot, select"pigmentation
therapy",adjust the parameter, set it to ‘ready’ .
3. Put coolinggel on treatment area about 2mm, you are suggested to put coolinggel in refrigerator to keep temperature of gel during0-4°C.
4. Weargoggles for patient and operator
5. Shot thetreatment area, let the crystal tip to touch cooling gel. You arepermitted to have1/3 overlapping on treatment area.
6. Wipe offcooling gel after treatment and clear treatment area with coolingwater. If patients feel warm or hot, you may put ice bag ontreatment area for 30 minutes untilheat-feeling disappears.
7. VascularTherapy
1. Cleartreatment area.
2. Turn onmachine , put the 580nm filter into the slot, select "vasculartherapy", adjust the parameter, set it to‘ready’
3. Put coolinggel on treatment area about 2mm, you are suggested to put coolinggel in refrigerator to keep temperature of gel during0-4°C.
4. Weargoggles for patient and operator
5. Shot thetreatment area, let the crystal tip to touch cooling gel. You arepermitted to have 1/3 overlapping on treatmentarea.
6. Wipe offcooling gel after treatment and clear treatment area with coolingwater. If patients feel warm or hot, you may put ice bag ontreatment area for 30 minutes untilheat-feeling disappears.
8. AcneTherapy
1. Cleartreatment area.
2. Turn onmachine , put the 430nm filter into the slot, select "acnetherapy", adjust the
parameter, setit to ‘ready’ .
3. Put coolinggel on treatment area about 2mm, you are suggested to put coolinggel in refrigerator to keep temperature of gel during0-4°C.
4. Weargoggles for patient and operator
5. Shot thetreatment area, let the crystal tip to touch cooling gel. You arepermitted to have 1/3 overlapping on treatmentarea.
6. Wipe offcooling gel after treatment and clear treatment area with coolingwater. If patients feel warm or hot, you may put ice bag ontreatment area for 30 minutes untilheat-feeling disappears.
9. Wrinkleremoval
1. Cleartreatment area.
2. Turn onmachine , put the 580nm filter into the slot, select "wrinkleremoval", adjust the parameter, set it to‘ready’
3. Put coolinggel on treatment area about 2mm, you are suggested to put coolinggel in refrigerator to keep temperature of gel during0-4°C.
4. Weargoggles for patient and operator
5. Shot thetreatment area, let the crystal tip to touch cooling gel. You arepermitted to have 1/3 overlapping on treatmentarea.
6. Wipe offcooling gel after treatment and clear treatment area with coolingwater. If patients feel warm or hot, you may put ice bag ontreatment area for 30 minutes untilheat-feeling disappears.
Advanced Wrinkle removal high power hari removal instrument
